A/T Range Selector Cable Replacement (A/T Column Shift)
Removal ProcedureCaution: Refer to The automatic transaxle range selector lever cable is made in Service Precautions.
1. Remove the automatic transaxle range selector cable retainer from the stud in the engine compartment.
2. Remove the steering column trim panel. Refer to Steering Column Filler Replacement in Instrument Panel, Gauges and Warning Indicators.
3. Remove the automatic transaxle range selector cable from the shift control lever.
4. Remove the automatic transaxle range selector cable from the PNP switch. Refer to AT Flange Selector Cable Replacement (AT PNP Switch).
5. Remove the automatic transaxle range selector cable through the hole in the dash.
Installation Procedure
Caution: Refer to The automatic transaxle range selector lever cable is made in Service Precautions.
1. Install the automatic transaxle range selector cable through the hole in the dash.
2. Properly route and position the automatic transaxle range selector cable.
3. Install the automatic transaxle range selector cable to the PNP switch. Refer to AT Range Selector Cable Replacement (AT PNP Switch).
4. Install the automatic transaxle range selector cable to the shift control lever.
5. Install the steering column trim panel. Refer to Steering Column Filler Replacement in Instrument Panel, Gauges and Warning Indicators.
6. Install the automatic transaxle range selector cable retainer to the stud in the engine compartment.
7. Adjust the transaxle side automatic transaxle range selector cable. Refer to PNP Switch Adjustment.