Disassembly

1. Remove 1-2 shift solenoid retainer clip, 1-2 shift solenoid with O-ring, 1-2 shift valve and 1-2 shift valve spring.

2. Remove 2-3 shift solenoid retainer clip, 2-3 shift solenoid with O-ring, 2-3 shift valve and 2-3 shift valve spring.

3. Remove pressure control solenoid retainer clip (PCS), PCS with two O-rings and screen, torque signal regulator valve and torque signal regulator spring.

4. Remove actuator oil filter retainer clip and actuator oil filter with O-ring.

5. Remove actuator teed limit valve retainer clip, bore plug, actuator feed limit spring and actuator feed limit valve.

6. Remove 3-4 shift valve retainer clip, bore plug with O-ring, 3-4 shift valve and 3-4 shift valve spring.

7. Remove 1-2/3-4 accumulator valve retainer clip, plug, accumulator valve spring and accumulator valve.

8. Remove pressure regulator valve retainer clip, bushing, pressure regulator boost valve, isolator spring, pressure regulator valve spring and pressure regulator valve.

9. Remove 2-3 accumulator valve retainer clip, bore plug, accumulator spring and valve.

10. Remove TCC feed limit valve retainer clip, bore plug, spring and TCC feed limit valve.

11. Remove TCC control valve retainer clip, bore plug, spring and TCC control valve.

12. Remove TCC solenoid retainer clip, TCC solenoid with two O-rings and screen, TCC regulated apply valve and spring.