Operation CHARM: Car repair manuals for everyone.

Engine - Knock, Revised Timing Belt Specifications

Number 83-T-10 Section 6 Date 02/83
Subject: ENGINE KNOCK/REVISED TIMING BELT TENSION SPECIFICATIONS - 1982 J2000 WITH 1.8L OHC 4-CYLINDER ENGINE (VIN CODE O)
A knocking noise in the front area of the engine may be caused by a loose timing belt hitting the timing belt front cover. If this condition is encountered, remove the timing belt front cover and check the belt tension.

If the belt is found to be loose, remove the belt and visually inspect the root of the cogs for cracks. If cracks are apparent, replace the timing belt. Timing belt tension specifications that appear on page 6A2-10 in the 1982 J2000 OHC 4-Cylinder Engine Service Manual Supplement have been revised as follows:

New Belt 180 N (40 lbs.)
Used Belt 120-160 N (26-35 lbs.)

These adjustments are to be made on a cold engine.

WARRANTY INFORMATION

Labor Operation J0659
Time Allowance .7 Hr.