Start and Stall Condition
Test 1:
Tests 2 - 5:
Tests 6 - 10:
Tests 11 - 14:
Tests 15 - 18:
SYMPTOM
START AND STALL CONDITION
POSSIBLE CAUSES
- Fuel filter/pressure regulator (high)
- Refer to VTSS
- Checking the PCM CCD communication
- Fuel pump capacity (volume) out of specs
- Other possible causes for start & stall
- High resistance in the fuel pump relay output circuit
- Fuel pump inlet strainer plugged
- TPS voltage change not smooth
- TPS voltage greater than 0.92 volts with throttle closed
- High resistance in the fuel pump ground circuit
- Fuel pump module
- Kinked/Restricted fuel supply line
- ECT sensor (out of calibration)