Operation CHARM: Car repair manuals for everyone.

Manual Compass Calibration

Compass Calibration (Fast Method)

When the compass is subjected to excessive magnetic fields, the EMTM automatically enters a fast calibration mode where it tries to compensate for the large magnetic shifts. Manual activation of the fast calibration mode is usually not required.

If the compass is inaccurate or appears to be inaccurate, the fast
calibration mode may be manually entered by using the following procedure:

1. Set the EMTM to Compass/Temperature mode and press the reset button (right lamp button) for 10 seconds.
2. The compass variance defaults to 8 after the fast calibration is manually activated.
3. Complete the compass variance setting procedure by referring to the Compass Variance Procedure.
4. Drive the vehicle in three 3600 turns in an area free of large metal objects. If the CAL symbol remains lit after completing this step, the roof panel may need to be demagnetized.