Inflatable Restraint Instrument Panel Module Replacement
REMOVAL PROCEDURECAUTION: Refer to SIR Inflator Module Handling And Storage Caution in Service Precautions.
1. Disable the SIR system. Refer to Air Bag(s) Arming and Disarming.
2. Remove the instrument panel (I/P) trim pad.
3. Remove the mounting fasteners (3) from the inflatable restraint I/P module.
4. Remove the inflatable restraint I/P module (2) from the cross-car beam (1).
5. Fully deploy the module before disposal. If the module was replaced under warranty, fully deploy and dispose of the module after the required retention period. Refer to Inflator Module Handling and Scrapping.
INSTALLATION PROCEDURE
1. Install the I/P module (2) to the cross-car beam (1).
NOTE: Refer to Fastener Notice in Service Precautions.
2. Install the I/P module mounting fasteners (3).
Tighten
Tighten fasteners to 12 N.m (106 lb in).
3. Install the I/P trim pad.
4. Enable the SIR system. Refer to Air Bag(s) Arming and Disarming.