Operation CHARM: Car repair manuals for everyone.

A/T Mount Bracket Replacement

REMOVAL PROCEDURE





1. Raise and support the vehicle.
2. Remove the left front tire and wheel.
3. Remove the left engine splash shield.
4. Use floor stands to support the transaxle.
5. Remove the transaxle bracket to transaxle mount Upper nuts.





6. Remove the transaxle mount bracket to transaxle bolts/screws.
7. Remove the transaxle mount bracket.

INSTALLATION PROCEDURE





1. Position the transaxle mount bracket.
2. Hand start the transaxle mount bracket bolts/screws.
3. Install the transaxle mount bracket bolts/screws.
^ Start with the forward lower bolt and work clockwise to tighten the transaxle mount bracket bolts/screws to 95 Nm (70 ft. lbs.).

NOTICE: Refer to Fastener Notice in Service Precautions.

4. Remove the support from the transaxle.





5. Install the transaxle bracket to the transaxle mount upper nuts.
^ Tighten the transaxle mount upper nuts to 47 Nm (35 ft. lbs.).

6. Install the left engine splash shield.
7. Install the left front tire and wheel.
8. Lower the vehicle.