Trim Plate

REMOVAL PROCEDURE

Trim Plate Replacement: Front Floor Console - Removal Procedure:

1. Open the front floor console storage compartment door.
2. Ensure that the front cup holder is in the open position.
3. Remove the bolts retaining the front floor console trim plate.
4. Carefully lift to release the console trim plate.
5. Disconnect the electrical connector from the traction control switch.

Trim Plate Replacement: Front Floor Console - Removal Procedure:

6. Depress the retaining tabs on the underside of the traction control switch, then remove the switch from the trim plate.

INSTALLATION PROCEDURE

Trim Plate Replacement: Front Floor Console - Installation Procedure:

1. Align the traction control switch to the front floor console trim plate then press into place to secure.

Trim Plate Replacement: Front Floor Console - Installation Procedure:

2. Connect the electrical connector to the traction control switch.
3. Install the console trim plate to the console.
4. Install the front floor console trim plate retaining screws.

Tighten
Tighten the front floor console trim plate retaining screws to 2 N.m (18 lb in).

5. Close the front cup holder.
6. Close the front floor console storage compartment door.