Window Regulator - Rear Door

WINDOW REGULATOR







REMOVE OR DISCONNECT
1. Trim panel and water deflector.
2. Tape window in full up position.
3. Rivets with a 1/4" drill bit.
4. Sash bolts.
5. Wire connector.
6. Regulator through access hole.

INSTALL OR CONNECT
1. Regulator into door through access hole.
2. Wire connector.
3. Sash bolts to 9 N.m (79 lb in)
4. Regulator to door using 1/4" peel-type rivets.
5. Remove tape from window and check for proper window operation.
6. Water deflector and trim panel.