Operation CHARM: Car repair manuals for everyone.

Service Procedure

FIGURE 1:




1. Open console front compartment door and clean area where foam pads are to be installed by wiping with a clean cloth. Refer to Figure 1.

2. Remove backing from foam pads to expose adhesive surface and install pads in locations shown in Figure 1.
3. Close console compartment door.
4. Install a Campaign Identification label. Each vehicle modified in accordance with the instructions outlined in this Service Procedure will require a Campaign Identification label. Each label provides a space to include the campaign number, the five (5) digit dealer code of the dealer performing the campaign service, and the date vehicle was campaigned. This information may be inserted with a typewriter or ballpoint pen. When installing label, clean the surface of the radiator upper mounting support and apply the campaign label where it is readily visible.