Operation CHARM: Car repair manuals for everyone.

In-Vehicle Sensor





IN-VEHICLE SENSOR


Removal and Installation


REMOVAL





1. Remove both instrument side masks (1).





2. Open the fuse block cover, remove the instrument lower cover screw (A), then remove the instrument lower cover (1).
- Disconnect the harness connectors.
- Disconnect the aspirator screws.
3. Disconnect the in-vehicle sensor electrical connector.





4. Remove the in-vehicle sensor screw and the in-vehicle sensor.

INSTALLATION
Installation is in the reverse order of removal.
- Make sure that the aspirator hose is securely attached to the in-vehicle sensor when installing the instrument lower cover LH.