Operation CHARM: Car repair manuals for everyone.

Crankshaft Main Bearing

MAIN BEARING










Undersize






Bearing Clearance







Main Bearing Cap






1. Tighten lower cylinder block bolts in the numerical order as shown and according to the following steps:

a. Apply new engine oil to threads and seat surfaces of the bolts.

b. Tighten bolts No. 11 - 22 only in the order as shown, to specification below.

Step 1, bolts 11 - 22 only : 25.1 N.m (2.6 kg-m, 19 ft-lb)

c. Tighten bolts No. 1 - 10 only in the order as shown, to specification below.

Step 2, bolts 1 - 10 only : 39.2 N.m (4.0 kg-m, 29 ft-lb)





d. Tighten bolts No. 1 - 10 only in the order as shown, to specification below using Tool.

CAUTION: Check tightening angle using Tool. Do not make judgment by visual inspection.

Tool number : KV 10112100 (BT-8653-A)

Step 3, bolts 1 - 10 only : 60° degrees rotation