With Intelligent Key System

FRONT FENDER


Removal and Installation


CAUTION:
Use a shop cloth to protect the body from being damaged during removal and installation.

REMOVAL
1. Remove side turn signal lamp. Refer to Removal And Installation.
2. Remove front grille. Refer to Removal And Installation.
3. Remove front bumper fascia. Refer to Regular Grade.
4. Remove front combination lamp. Refer to Removal And Installation.
5. Remove clips and screws of fender protector. Refer to Removal And Installation.
6. Remove front fender cover.
7. Remove mounting bolts and remove front fender.

CAUTION:
An viscous urethane foam is installed on the back surface of front fender. When removing the front fender, be careful to not deform the front fender while performing the procedure and removing the viscous urethane foam a little at a time.

INSTALLATION
Install in the reverse order of removal.

CAUTION:
- After installation, apply the touch-up paint (the body color) onto the head of front fender mounting bolts.
- After installation, adjust the following part.
- Hood assembly : Refer to With Intelligent Key System.
- Front door : Refer to With Intelligent Key System.
- Front combination lamp : Refer to Description.