Main Bearing Cap
Main Bearing CapTighten main bearing cap bolts in two steps.
NOTE: Tighten main bearing cap bolts in numerical order as shown:
-: Engine front
Step 1 34.3 Nm (3.5 kg-m, 25 ft-lb)
Step 2 60° clockwise
Tool number: KV10112100 (BT-8653-A)
After installing bolts, make sure that crankshaft can be rotated smoothly by hand.
Check crankshaft end play.
MAIN BEARING CAP BOLT OUTER DIAMETER
Measure the outer diameters ("d1", "d2") at two positions as shown.
A: "d1" measuring position
B: "d2" measuring position
If reduction appears in places other than "B" range, regard it as "d2".
Limit ("d1" - "d2") 0.15 mm (0.0059 in)
If it exceeds the limit (a large difference in dimensions), replace main bearing cap bolt with a new one.