Precautions For TCM and CVT Assembly Replacement

Precautions for TCM and CVT Assembly Replacement
When replacing CVT assembly or TCM, refer to the pattern table and erase the EEPROM in the TCM if necessary.

CAUTION:
^ Check if new data (Unit ID) are entered correctly after replacing CVT assembly and erasing data in TCM. (Connect CONSULT-II, and then turn ignition switch OFF.)
^ "TCM POWER SUPPLY [P1701]" may be indicated soon after replacing TCM or CVT assembly (after erasing the memory). Restart the self-diagnosis after erasing the self-diagnosis result. Check that no error is detected.