Operation CHARM: Car repair manuals for everyone.

Vehicle Cannot Be Started From D1

Vehicle Cannot Be Started From D1

SYMPTOM: Vehicle cannot be started from D1 on cruise test - Part 1.

DIAGNOSTIC PROCEDURE
1. CONFIRM THE SYMPTOM
Check if vehicle creeps in R position.
OK or NG
OK >> GO TO 2.
NG >> Refer to "Vehicle Does Not Creep Backward In R Position". Vehicle Does Not Creep Forward In "D" Position
2. CHECK SELF-DIAGNOSTIC RESULTS
Perform self-diagnosis.
Is any malfunction detected by self-diagnostic?
YES >> Check the malfunctioning system.
NO >> GO TO 3.
3. CHECK LINE PRESSURE
Check the line pressure at the engine stall point.
OK or NG
OK >> GO TO 4.
NG >> Check the malfunctioning item.
4. DETECT MALFUNCTIONING ITEM
1. Control valve assembly.
2. Disassemble "A/T".
3. Check the following items:
- Forward and direct clutch assembly.
- One-way clutch No.2.
- B5 brake.
OK or NG
OK >> GO TO 5.
NG >> Repair or replace damaged parts.
5. CHECK TCM
1. Check TCM input/output signal.
2. If NG, recheck TCM pin terminals for damage or loose connection with harness connector.
OK or NG
OK >> GO TO 6.
NG >> Repair or replace damaged parts.
6. CHECK SYMPTOM
Check again.
OK or NG
OK >> INSPECTION END
NG >> Repair or replace damaged parts.