Operation CHARM: Car repair manuals for everyone.

Intake Manifold

Intake Manifold











Install intake manifold bolts in two stages in the numerical order as shown.
Stage 1 5 - 10 Nm (0.5 - 1.0 kg-m, 44 - 86 inch lbs.)
Stage 2 26 - 31 Nm (2.7 - 3.2 kg-m, 20 - 23 ft. lbs.)





^ Seat the fuel injectors into the intake manifold with new O-rings. Tighten the fuel rail bolts as shown, in two stages:
Stage 1 9.3 - 10.8 Nm (0.95 - 1.1 kg-m, 83 - 95 inch lbs.)
Stage 2 20.6 - 26.5 Nm (2.1 - 2.7 kg-m, 16 - 19 ft. lbs.)





^ Install the intake manifold collector bolts in the numerical order as shown.
Intake manifold collector bolts 18 - 21 Nm (1.8 - 2.2 kg-m, 13 - 15 ft. lbs.
^ Tighten the bolts of the intake manifold collector pipe and electric throttle control actuator assembly equally and diagonally to specification.
Intake manifold collector pipe bolts 18 - 21 Nm (1.8 - 2.2 kg-m, 13 - 15 ft. lbs.)