Rod Bearing Cap

Rod Bearing Cap





Tighten the connecting rod bolt as follows: Apply engine oil to the threads and seats of the connecting rod bolts.

CAUTION: Check tightening angle. Do not make judgment by visual inspection.

Tool number: KV10112100 (BT-8653-A)
Stage 1 18.6 - 20.6 Nm (1.9 - 2.1 kg-m, 14 - 15 ft. lbs.)
Stage 2 Rotate bolts 85° - 95° (target 90°)
Check the connecting rod side clearance.
After tightening the bolts, make sure that the crankshaft rotates smoothly.

OUTER DIAMETER OF CONNECTING ROD BOLT
^ Measure outer diameter (d) at position as shown.





^ When d exceeds the limit (when it becomes thinner), replace the bolt with a new one.
Limit 7.75 mm (0.3051 inch) or less