Heater Core Case: Service and Repair
HEATER & COOLING UNIT ASSEMBLYRemoval and Installation
REMOVAL
1. Discharge refrigerant from A/C system.
2. Drain coolant from cooling system.
3. Disconnect heater hoses from heater core pipes.
4. Disconnect refrigerant lines from evaporator.
5. Remove the instrument panel.
6. Remove the blower unit.
7. Disconnect mode door motor and air mix door motor connectors.
8. Remove the heater and cooling unit.
INSTALLATION
Installation is the reverse order of removal.
NOTE: Fill radiator with coolant. Recharge the A/C system.