Generic Scan Tool
OVERALL FUNCTION CHECK
This procedure can be used for checking the overall EGR function. During this check, a Diagnostic Trouble Code (DTC) might not be confirmed.
Before starting with the following procedure, check the engine coolant temperature of the freeze frame data with CONSULT or Generic Scan Tool.
If the engine coolant temperature is higher than or equal to 55°C (131°F), perform only "For the above malfunction a)".
If the engine coolant temperature is lower than 55°C (131°F), perform both "For the above malfunction a)" and "For the above malfunction b)"
For The Above Malfunction b)
1. Confirm the engine coolant temperature is lower than 55°C (131°F) in "Mode 1" with generic scan tool. Perform the following steps before its temperature becomes higher than 55°C (131°F).
2. Start engine.
3. Check for the EGR valve lifting when racing from 2,000 rpm up to 4,000 rpm under no load.
EGR valve should be closed and should not lift up.