EGR Control Solenoid: Testing and Inspection
Fig. 59 Checking solenoid valve.:
Fig. 60 Checking solenoid valve.:
Fig. 61 Checking solenoid valve.:
1. Remove solenoid valve.
2. Check continuity of air passage by sucking or blowing on valve(s):
a. On all valves except valve No. 2 on 1983 Maxima, there should be no continuity between "A" and "B" or "A" and "C" but there should be continuity between "B" and "C", Figs. 59-61.
b. On valve No. 2 on 1983 Maxima, there should be continuity between "A" and "B".
3. Apply battery voltage at harness connector and check continuity of air passage by sucking or blowing on valve(s). Apply battery voltage to yellow (+) and black terminals for No.1 valve on 1983 Maxima, to white (+) and black terminals for No. 2 valve, and to green (+) and black terminals for No. 3 valve.
a. On all valves except valve No. 2 on 1983 Maxima, there should be continuity between "A" and "B" but there should be no continuity between "A" and "C" or "B" and "C".
b. On valve No. 2 on 1983 Maxima, there should be no continuity between "A" and "B".