System Specifications
Timing Chain TensionerEM-172 Exploded View (Part 1):
EM-172 Exploded View (Part 2):
Crankshaft Pulley
Tighten bolts in numerical order as shown.
Install crankshaft pulley as follows:
Install crankshaft pulley, taking care not to damage front oil seal.
When press-fitting crankshaft pulley with plastic hammer, tap on its center portion (not circumference).
Tighten crankshaft pulley bolt in two steps.
Step 1 44.1 Nm (4.5 kg-m, 33 ft-lb)
Step 2 84° - 90° degrees clockwise
Timing Cover
Tighten bolts to the specified torque in numerical order as shown.
After all bolts tightened, retighten them to the specified torque in numerical order as shown.
Bolt position Bolt diameter
1 - 5 10 mm (0.39 in)
6 - 25 6 mm (0.24 in)
Bolt position Tightening specification
1 - 5 55.0 Nm (5.6 kg-m, 41 ft-lb)
6 - 25 12.7 Nm (1.3 kg-m, 9 ft-lb)