System Specifications

Cylinder Block

Camshaft Diameter and End Play:

Camshaft and Camshaft Bearing

Piston, Piston Ring and Piston Pin

Piston Diameters and Clearances:

PISTON





PISTON PIN





PISTON RING

Crankshaft Diameters and Distortion:

Connecting Rod

Crankshaft Journal Diameters:

Crankshaft End Play:

Crankshaft





Bearing Clearance

Available Main Bearing

Standard Bearing Sizes:

STANDARD

Undersized Bearing Sizes:

UNDERSIZE (SERVICE)

Available Connecting Rod Bearing

Standard Bearing Sizes:

STANDARD

Undersized Bearing Sizes:

UNDERSIZE (SERVICE)





Main bearing cap bolts
Tighten all bolts in two or three steps to specification.
Main bearing cap bolts 46 - 56 Nm (4.7 - 5.7 kgf-cm, 34 - 41 ft. lbs.)

Connecting rod bearing nuts
Step 1 14 -16 Nm (1.4 -1.6 kgf-cm, 10 -12 ft. lbs.)
Step 2 60° - 65° degrees clockwise; or 38 - 44 Nm (3.9 - 4.5 kgf-cm, 28 - 33 ft. lbs.)