Fuel System Monitor
Fuel trim monitor (P0171, P0172, P0174. P0175)Test conditions and main points to note:
1. Conduct test drives in a manner that will ensure all the following conditions are met:
1. Engine coolant temperature: 80 - 97 °C (176-207 °F) or higher (with the engine fully warmed up).
2. Outside air temperature: -10 °C (14 °F) or higher.
3. Selector lever position: D range.
2. The following drive pattern (from start up to when the ignition is turned off) completes one trip monitor (Time required is approximately 35 minutes.)
<>1: After the engine is completely warmed up, turn off the ignition.
<>2: Start the engine and accelerate quickly until speed reaches 89 - 97 kph (55 - 60 mph).
<>3: Monitoring period: Drive for 30 seconds or more while maintaining speed between 89 - 97 kph (55 - 60 mph). Then drive steadily and continuously for 120 seconds or more. (Accelerate and decelerate slightly during the 120 second period. Braking is permissible, but avoid sudden acceleration or deceleration.)
<>4: Decelerate and stop the vehicle. After stopping the vehicle, turn off the ignition.