M/T - Replacement Control Cables Are Adjustable
91mitsubishi04
NO. TSB-91-22-003
DATE February, 1991
MODEL 1991 Mirage
SUBJECT: ELIMINATION OF ADJUSTERS FROM
MANUAL TRANSAXLE CONTROL CABLES
PURPOSE
This bulletin describes the steps to take when having difficulty adjusting the "shift" and "select" cables on the 1991 Mirage equipped with manual transaxle.
DESCRIPTION
The 1991 Mirage is equipped with non-adjustable control cables on its manual transaxle. If installation instructions are required, follow the procedure shown on page 22-15 of the 1991 Mirage Service Manual, Volume 1.
If you encounter difficulty moving the shifter after installing the non-adjustable cables, replace them with the previous (adjustable) design. Install and adjust them according to instructions in the 1990 Mirage Service Manual, Volume 1, page 22-14.
When ordering replacement cables, all of them will be the adjustable type. Refer to the illustration below for cable comparison.
PARTS INFORMATION
Description Part Number
Adjustable Select/Shift Cable MB484815
WARRANTY INFORMATION
Standard warranty procedures apply.