Operation CHARM: Car repair manuals for everyone.

Equipment Hookup & Adjustment Procedures

LOW ALTITUDE:

1. Connect timing light to cylinder #1.
2. Start engine and let idle at operating temperature, check timing for 10° btdc, adjust as required.



HIGH ALTITUDE:

1. Connect timing light to cylinder #1 and start engine.

ignition adjustment terminal:






2. With engine stopped disconnect the female connector from the waterprooof ignition timing connector
3. Using a test wire, ground female connector.
4. Start engine and let idle at operating temperature, check timing for 10° btdc, adjust as required.
5. Stop engine and disconnect ground wire and reconnect timing connector.
6. Restart engine and check for actual timing of up to 15° btdc.