M/T - KM200 Synchronizer Spring Changes
88mitsubishi02SUBJECT:
KM200-SERIES MANUAL TRANSAXLE SYNCHRONIZER SPRING CHANGES
NO. TSB-88-21-007
DATE April, 1988
MODEL 1988 Mirage & 1988 Sigma
FIGURE 1:
SERVICE INFORMATION
The shape of the synchronizer springs and synchronizer keys (Figure 1) in the KM200-series manual transaxle of 1988 Mirage and 1988 Sigma vehicles has been changed to prevent the spring from turning off the keys. This bulletin describes the changes and provides new part number information for the springs and keys.
The spring and key changes are effective from September 1987 production (from transaxle assembly serial number ET9345).
FIGURE 2:
DETAILS OF CHANGES Synchronizer Spring
The shape at the center portion of the spring has been changed from a "stepped part" to a protrusion as shown in Figure 2.
FIGURE 3:
Synchronizer Key
The recess on the bottom of the synchronizer key has been made deeper as shown in the cross-section views of Figure 3.
PARTS INFORMATION
Refer to the current parts microfiche for the new part numbers.
Parts Interchangeability
Synchronizer Spring - The new springs are interchangeable with the old springs only if installed with the new keys.
Synchronizer Key - The new and old keys ARE interchangeable.