Operation CHARM: Car repair manuals for everyone.

Exhaust Gas Recirculation: Description and Operation

Fig. 28 EGR system.:





Exhaust gas recirculation, Fig. 28 is used to reduce oxides of nitrogen emissions in the vehicle exhaust. EGR uses partial recirculation of the exhaust gases from a port in the cylinder head to a port in the intake manifold. The EGR valve controls the flow of exhaust gas in response to 'E' port vacuum. At partial throttle settings 'E' port vacuum is high and the EGR valve is open. At full throttle and idle 'E' port vacuum is low and the EGR valve remains closed. The thermo valve prevents EGR operation until the engine reaches operating temperature.


THERMO VALVE

A thermo valve is used to sense the coolant temperature at the intake manifold. When the coolant temperature is lower than the pre-set value the thermo valve prevents operation of the EGR valve. When the coolant temperature is higher than the pre-set temperature the thermo valve allows operation of the EGR valve in response to port vacuum.