Repair Procedure 3

Figure 16:

PROCEDURE 3: INSPECT THE EXHAUST MANIFOLD FOR LEAKAGE AND REPLACE IF NECESSARY

Refer to Figure 16.

1. Remove the heat protector.

2. Visually inspect the back side of the heat protector. If you see any signs of gas leakage from the exhaust manifold (carbon deposit, for example), replace the exhaust manifold.

NOTE: The replacement exhaust manifold is included in Parts Kit MD160264.

3. If there is no sign of exhaust gas leakage on the back side of the protector, it is not necessary to replace the exhaust manifold.

4. Reinstall the heat protector.