| Basic Bore in Cylinder Crankcase for Liner | 94.000 - 94.035 Millimeter (mm) |
| Maximum Tolerance Limit, Lengthwise or Clockwise | 0.10 mm |
| Permissible Ovality and Conicity of Cylinder Bore | 0.01 Millimeter (mm) |
| Permissible Ovality and Conicity of Basic Bore in Crankcase | 0.01 Millimeter (mm) |
| Permissible Tolerance Perpindicular to Crankshaft Axis, Relative to Cylinder Height | 0.05 Millimeter (mm) |
| Permissible Roughness (R3z) of Cylinder Bore | 0.002 - 0.004 Millimeter (mm) |
| Roughness of Crankcase Parting Surface | 0.006 - 0.016 Millimeter (mm) |
| Honing Angle | 25 deg |
| Permissible Waviness of Cylinder Bore | 50 % of Roughness |
| Chamfer of Cylinder Bores | See Image |