ALR Inspection

ALR INSPECTION

1. Pull the belt out fully to change the lock mode from ELR to ALR.

2. Verify that retractor makes a clicking sound as the belt slowly retracts. If no sound is heard, the lock mode has not changed to ALR. If necessary, repeat Step 1.

- If there is any malfunction, replace the seat belt.

3. Verify that the retractor locks when pulled.

- If there is any malfunction, replace the seat belt.

4. Verify that the lock mode changes to ELR when the belt is fully retract.

- If there is any malfunction, replace the seat belt.