Console: Service and Repair
CONSOLE REMOVAL/INSTALLATIONCenter Panel Removal Note
1. Set the selector lever in N range.
2. Remove the clips A using a tape-wrapped screwdriver.
3. Pull the center panel forward to remove the clips B and locator pins C from body.
4. Disconnect the cigarette lighter, cabin temperature sensor, connector, ashtray, and illumination bulb to remove the center panel.
5. Remove the ring and ashtray case.
Rear Console Disassembly Note
1. Disassemble in the order indicated in the table.
2. Assemble in the reverse order of disassembly.
Hinge removal/installation note
1. While removing or installing the hinge, insert the pin to fix the hinge.