Flex Plate: Service and Repair

REMOVAL / INSTALLATION
1. Remove in the order indicated in the illustration, referring to the removal note.
2. Install in the reverse order of removal indicated in the illustration, referring to the installation note.





Removal Note
1. Set the Special Service Tool (SST) against the drive plate.
2. Remove the bolts and the drive plate.

Torque Sequence:

Installation Note
1. Set the SST against the drive plate.
2. Gradually tighten the drive plate mounting bolts in the order shown to 97 - 102 Nm (71 - 75 ft. lbs.).