Front

PROCEDURE
1. Remove in the order indicated in the table.
2. Install in the reverse order of removal indicated in the table.
3. After installation, depress the pedal a few times. Then rotate the wheel by hand, and verify that the brakes do not drag.





REMOVAL NOTE
Disc Plate
Mark the wheel hub bolt and disc plate before removal for reference during installation.





INSTALLATION NOTES
Disc Pad
1. Push the piston fully inward by using the Special Service Tool (SST).
2. Install the disc pad.
3. Bleed brakes. Service and Repair

Disc Plate
1. Remove any rust or grime on the contact face of the disc plate and wheel hub.
2. Install the disc plate and align the marks made before removal.