Rear Cross-Member: Service and Repair
Part 1 Of 2:
Part 2 Of 2:
REMOVAL
1. Remove the differential and the power plant frame. Refer to Transmission and Drivetrain.
2. Lower the crossmember and other suspension parts as an assembly, and then separate the parts.
3. Remove in the order indicated in the illustration.
INSTALLATION
1. Install in the reverse order of removal indicated in the illustration.
2. Adjust the rear wheel alignment.
3. Bleed the air from the brake system. Refer to Brakes and Traction Control.
4. Adjust the parking brake lever stroke. Refer to Brakes and Traction Control.