Evaporator Core: Service and Repair
Do not allow compressor oil to spill. Immediately plugall open fittings to keep moisture and dirt out of the system.
1. Discharge refrigerant as described under Air Conditioning.
2. Remove instrument panel undercover, glove compartment and glove compartment cover.
3. Remove stay, then passenger side air bag module as described under Air Bag System.
4. Remove cooler pipe No. 4 , then No. 3, Fig. 10.
5. Remove aspirator hose, then disconnect power transistor, MAX-HI relay and evaporator temperature sensor electrical connectors.
6. Remove evaporator (cooling unit).
7. Reverse procedure to install, noting the following:
a. When installing new evaporator, add 1.5 oz. of compressor oil through high-pressure side of A/C compressor.
b. Replace O-rings at pipe joints when installing pipes. Apply compressor oil to O-rings before installation.