Double-Lock Connectors

DOUBLE-LOCK CONNECTOR OPERATION

The connectors in the air bag system are double-lock connectors. Disconnect them as follows:

Air Bag System:

1. Push the knob of the orange connector down and pull the connector out.
2. Push the knob of the blue connector in and pull the connector out.

Note:
- When the 2-pin connector of the air bag module and clock spring is disconnected, a short occurs that will prevent the air bag from deploying during servicing.

Warning:

- Reconnecting the 2-pin connector of the air bag module and clock spring with pin B broken can be dangerous. In an accident, the air bag will not deploy, causing serious injury or death. If pin B is broken, replace the combination switch or harness.

3. Connect the connectors in the reverse order of disconnection. Make sure pin B is inserted properly into part A. This will fix the short caused by disconnection and allow current to flow to the air bag module again.