Vacuum Chamber - Modifications
Bulletin No. 014/95Issued 11/14/95
Revised 11/23/95
Category
F
Applicable Model/s
1995 Protege with BP Engine
Subject
VACUUM CHAMBER MODIFICATION
The "Parts Information" portion of this bulletin is revised. Changes are highlighted by asterisks and shown in illustrations. Replace the original bulletin with this revised copy.
APPLICABLE MODELS/VINS
All 1995 Protege vehicles with a BP engine and a VIN of JM1BA****S0169570 and higher.
DESCRIPTION
The vacuum chamber has changed from an integral type to a separated type. This change improves productivity. The new type is identified by a separate check valve. Refer to the illustration.
When servicing, it is important to identify the type of vacuum chamber installed on the vehicle. * These vacuum chambers are not interchangeable and will not work properly if installed on the wrong vehicle. *
PARTS INFORMATION