Audio - Blank/Skip Function, Operation
Bulletin No.: 003/94Issued: 7/5/94
Revised:
Category
T
Applicable Model/s
1995 Millenia
Subject:
AUDIO "BLANK / SKIP" FUNCTION
APPLICABLE MODELS/VINS
All 1995 Millenia Vehicles
DESCRIPTION
Some customers may not be familiar with the "Blank / Skip" function of their audio system. This bulletin describes how and when this function operates and provides instructions for overriding.
When The "Blank / Skip" Function Operates:
The function detects recording levels of less than -30 dB which last for 15 seconds (similar to the blank space at the end of a recording).
How The "Blank / Skip" Function Operates:
When recording levels lower than -30 dB are detected, the system will skip forward to the next recorded section.
NOTE:
When the recording level on a tape is extremely low the system may skip forward.
How To Override The "Blank / Skip" Function:
1. Turn the audio system on.
2. Push and hold preset buttons "5" and "6" at the same time for approximately 1.5 seconds.
3. After 1.5 seconds, a beep will be heard through the system's speakers. This indicates that the function has been canceled.
4. Repeat steps 2 and 3 to activate the "Blank / Skip" function.
NOTE:
Turning the ignition or audio system off resets the "Blank / Skip" function. Future production modifications will keep the setting selected (on or off) in memory regardless of power interruption.