TCS Off Switch - Traction Control System
Removal/Installation
The TCS OFF switch is installed on the rear console.
Inspection
Switch and ABS/TCS CU harness
1. Check the wiring harness between the ABS/TCS control unit and TCS OFF switch for short to ground.
2. Remove the ABS/TCS CU connector.
3. Measure the resistance between N and ground.
When switch is pressed :100 ohms or less
When switch is released: infinity
4. If not within specification, check the harness and the TCS OFF switch.
Switch operation
1. Remove the TCS OFF switch.
2. Measure the resistance between I and J of the connector.
When switch is pressed : 100 ohms or less
When switch is released : infinity