Replacement
INPUT/TURBINE SPEED SENSORReplacement
1. Remove the transmission assembly.
2. Remove the input/turbine speed sensor from the transmission case.
3. Apply ATF to a new O-ring and install it on the input/turbine speed sensor.
4. Install the new input/turbine speed sensor and new gasket.
5. Install new bolts and tighten.
Tightening torque: 5.0 - 6.8 N.m {50 - 70 kgf.cm, 44 - 60 in.lbf}
6. Install the transmission assembly.