Operation CHARM: Car repair manuals for everyone.

Idle Air Control Valve




Removal/Installation
1. Disconnect negative battery cable.
2. Remove the extension manifold.
3. Disconnect the solenoid valve connector.
4. Remove the idle air control valve as shown in figure.
5. Install in the reverse order of removal.




Inspection
1. Remove the solenoid valve. (Refer to steps 1-5 above.)
2. Measure the solenoid valve resistance with an ohmmeter.

Resistance: 10.7-12.3 ohms 20°C (68°F)

3. If not as specified, replace solenoid valve.