Turbocharger

Fig. 13, Turbo & Related Components Removal:

Remove components in the order shown in Fig. 13, noting the following:
1. When removing and carrying the turbocharger, do not hold the actuator, rod or actuator.
2. If studs are damaged, replace them with manufacturer specified studs and nuts. Using unspecified studs may cause gas leakage because of insufficient clamping.
3. Tape turbocharger air port, exhaust port and oil line to prevent entry of foreign material.
4. Do not deform or allow oil on the insulators.
5. Do not reuse retaining nuts.