Torque Converter

TORQUE CONVERTER

Inspection





1. Check the outside of the converter for damage and cracks. Replace the torque converter if there are any problems.
2. Check for rust on the pilot hub or the boss. Remove any rust completely.

Washing inside the converter
1. Drain all ATF remaining in the converter.
2. Pour in ATF {2.0 L, 2.1 US qt. 1.8 Imp qt}





3. Shake the converter to clean the inside. Pour out the ATF.
4. Repeat steps 2 and 3 until you are sure that the inside of the torque converter is clean.