Accumulators
ACCUMULATORSDisassembly / Inspection / Assembly
1. Disassemble in the order shown in the figure, referring to Disassembly Note.
2. Inspect all parts and replace if necessary.
3. Assemble in the reverse order of disassembly, referring to Assembly Procedure.
Disassembly note
Accumulator piston
Remove the accumulator pistons from the transmission case by applying compressed air through the oil passage as shown in the figure.
Inspection
Accumulator spring
1. Measure the spring free length.
2. If not within specification, replace the spring.
Assembly procedure
Outer diameter and installation order of springs.
1. Apply ATF to the new O-rings and install them onto the accumulator pistons.
2. Apply even pressure to the perimeter of the accumulator pistons and install them into the transmission case.
3. Install each spring into its own accumulator piston.