Operation CHARM: Car repair manuals for everyone.

Thermo Time Switch: Testing and Inspection




COLD-START THERMOSWITCH
Removal / Installation
1. Disconnect the cold start thermoswitch connector.
2. Remove the cold start thermoswitch.
3. Use new packing and install in the reverse order of removal.

Tightening Torque: 29-40 Nm (22-30 ft.lb.)







Inspection
1. Place the thermoswitch in water with a thermometer and heat the water gradually.
2. Measure resistance of the thermoswitch.
3. If not as specified, replace the thermoswitch.