Volume Test
Injector Volume Test:
WARNING:
^Release fuel pressure.
^Keep sparks, cigarettes, and open flames away.
1. Remove injectors and fuel distributor as an assembly.
2. Connect Mazda SST 49 F013 102 and 49 L018 901, or equivalent, as shown.
3. Connect diagnosis connector terminals F/P and GND with jumper wire.
4. Turn ignition "ON" to run pump and pressurize system.
5. Catch fuel in graduated container and measure:
PRIMARY INJECTOR: 7.8 - 8.9 cu in (128 - 147 cc)/15 sec.
SECONDARY INJECTOR: 12.0 - 13.8 cu in (198 - 227 cc)/15 sec.
6. If not as specified, and not other problems are detected, replace injector.