Operation CHARM: Car repair manuals for everyone.

Float Level, Adjust


1. With the engine operating, check the fuel level in the fuel bowl sight glass.
2. If the fuel level is not to the specified mark in the sight glass, remove the air horn from the carburetor.
3. Invert the air horn on a stand and lower the float until the float seat lip just contacts the needle valve.
4. Measure the clearance ``H'' between the float and the air horn. If the clearance is not within specifications, bend the float seat lip until the proper clearance is obtained.
5. Lift up the float and check the clearance ``L,'' between float seat lip and the needle valve, or between air horn and bottom of float as indicated in specifications. If the clearance is not within specifications, bend the float stopper until the proper clearance is obtained.
6. Install the carburetor to the engine.
7. Operate the engine and make sure that the fuel is at the specified mark in the sight glass.