Blower Motor: Service and Repair

BLOWER MOTOR

REMOVAL







1. Remove the screw and reposition the windshield washer fluid reservoir.







2. Remove the screws from the rear of the RH fender apron and reposition the fender apron aside.







3. Remove the clips and the blower motor insulator.







4. Remove the blower motor.
1 Disconnect the blower motor electrical connector.
2 Remove the screws.
3 Remove the blower motor.







5. CAUTION: Prior to removing a wheel that is to be reused, clean any corrosion from the blower motor shaft to prevent damage to the wheel mounting diameter.

Remove the wheel from the blower motor.
1 Remove the push clip.
2 Remove the wheel from the blower motor.

INSTALLATION
1. To install, reverse the removal procedure.