Receiver Drier, Manifold and Tube Assembly

REMOVAL

1. Perform the Refrigerant Discharging and Recovery Procedure.







2. Disconnect the peanut fitting.







3. Disconnect the peanut fitting.







4. Remove the nut.







5. Remove the receiver drier mounting bracket clamp bolt. Move the receiver drier away from the fan shroud and remove the receiver drier.
6. Remove the receiver drier manifold assembly.

INSTALLATION
1. To install, reverse the removal procedure.
- Lubricate the O-ring seal with PAG Refrigerant Compressor Oil YN-12-C, F7AZ-19589-DA or equivalent meeting Ford specification WSH-M1C23 1-B.